Offline
Saludos a todos
Frp Alcatel OT-5029a con OT-Smart Furious Gold Pack 6
elegiremos el modelo a trabajar, selecionaremos frp remove,
y cunado nos indique conectaremos nuestro equipo apagado via
usb, y la box hara el resto
Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM53)) (Driver version: 3.2.0.0)
Preparing to start flash mode;
Preparing to open COM53
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: 07321a5a24f9e69ae37ee8605328025b
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6765 [CA00, 00, 6765, 00]
HW_STORAGE_EMMC: 0x534E0113 0x4B394A30 0x4D1A1038 0xBB475B79 [SIZE=0xE91000000]
IMEI1 [OTP 0000]: 354cxcxccxxcxc595-2
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: 5029E-2BRGDO11
USRDATA INFO: 0x193000000 SIZE: 0xCF8CFBE00
SPECIAL NOTE: If you are using windows 10 x64 be sure that the installed mtk driver version is 3.0.1504.0 . Any different drivers will create random read bugs on newer chipset phones.
As usual the correct drivers come inside OTSMart archive inside the "usb_driver" folder
Formatting FRP partition now...
Done;
Factory Reset Protection successfully removed !
Time needed - 00:00:00
Log file saved to: LOG_17_12_2020_16_15_44.txt
Espero les sea de utilidad bendiciones a todos
Frp Alcatel OT-5029a con OT-Smart Furious Gold Pack 6
elegiremos el modelo a trabajar, selecionaremos frp remove,
y cunado nos indique conectaremos nuestro equipo apagado via
usb, y la box hara el resto
Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM53)) (Driver version: 3.2.0.0)
Preparing to start flash mode;
Preparing to open COM53
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: 07321a5a24f9e69ae37ee8605328025b
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6765 [CA00, 00, 6765, 00]
HW_STORAGE_EMMC: 0x534E0113 0x4B394A30 0x4D1A1038 0xBB475B79 [SIZE=0xE91000000]
IMEI1 [OTP 0000]: 354cxcxccxxcxc595-2
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: 5029E-2BRGDO11
USRDATA INFO: 0x193000000 SIZE: 0xCF8CFBE00
SPECIAL NOTE: If you are using windows 10 x64 be sure that the installed mtk driver version is 3.0.1504.0 . Any different drivers will create random read bugs on newer chipset phones.
As usual the correct drivers come inside OTSMart archive inside the "usb_driver" folder
Formatting FRP partition now...
Done;
Factory Reset Protection successfully removed !
Time needed - 00:00:00
Log file saved to: LOG_17_12_2020_16_15_44.txt
Espero les sea de utilidad bendiciones a todos
